DIY-tuotteet
Gör dina kläder lysande! Välj ett mönster du tycker om och fäst trycket var som helst; på ryggsäcken, jackan, vantarna, mössan, halsduken, handväskan, träningsbyxorna eller strumpbyxorna. Klipp, placera och anpassa så som du vill!
Reflexbanden kan strykas, sys eller fästas var som helst; till och med i sömmarna, tofsen eller skosnören!
Attaching your print
Here's how!
How to attach your print
Attaching a reflective print is easy as pie! Let’s do it!
But first! Please try ironing the material you're planning on using with your iron on full power on some unnoticeable spot. We do not recommend attaching prints to Gore-Tex fabrics.
- Place the print where you want it, with the stickier/rougher side down and the smooth/slightly blurry side up. (If you’re attaching a piece of the film, make sure to remove the transparent film from the side that is towards the material.)
- Cover with a baking sheet.
- Place your iron over the print and press down with force for approx. 15 seconds. (The print is fine even if you press a tad longer, but any less might make it less cooperative.)
- Let the print cool to at least room temperature.
- Gently peel the top layer off with a swift motion.
- Cover the print with a baking sheet again.
- Place your iron over the print and press down with force for approx. 5 seconds.
And voilá, it’s time to shine!
You can also find these instructions on our website in text and video format.
Categories
Here are all our DIY-products sorted so they're easy for you to find based on what you're looking for.
Make your shiniest dreams come true
Cut and position any way you like
DIY FAQ
Something on your mind?
If this FAQ list doesn't have the answer you need, please don't hesitate to message us at kauppa@moiko.fi.
What material can the reflective print attached to?
Almost anywhere! Through our testing we've found that if the material can withstand the iron, it can also withstand attaching the print. Natural materials are ideal due to their rough surface (for example, merino wool, like our mittens), but we've also attached prints to hoodies, tights, running pants and dog leashes, among other things.
We do not recommend attaching the print on Gore-Tex materials, as the water-resistant surface cannot take the ironing. Always remember to test ironing the material with a baking paper in between and with the iron on the highest setting.
Can the print be washed?
Yes indeed it can!
Usually the material is more sensitive than the print, as these prints can be washed at up to 90 degrees. They will not come off! However, if possible, remember to turn the item inside out so that the print does not rub against the washing machine surfaces.
Can I cut the print?
Absolutely!
It's great to unleash your creativity. Before ironing, you can cut the image to be ironed to your liking. For example, you can cut a flower print in half and iron the halves on different sides of a zipper.